Kenwood DVF-3060 User Manual - Page 16

16 Playback of disc Basic play Preparation MAIN UNIT POWER Using the On-screen banner display DV-603/DVF-3060/DVF-3060K (EN/K,P,E,T,M,X,Y) DV-603/DVF-3060 DVF-3060K TOP MENU key TOP MENU key 6 (Play/Pause) key POWER ON/ OFF switch Disc tray ON OFF ÷ Set the POWER ON/OFF switch to the ON ( ) position. ÷ After the power is switched ON, there is a delay of about 3 seconds before the display is lit. 7 (Stop) key 7 (Stop) key 6 (PLAY/PAUSE) key 0 (open/close) key 6 (Play/Pause) key 7 (Stop) key 1 Load a disc. MAIN UNIT 1 Open the tray. 0 2 Place a disc. Label side 2 Start playback. MAIN UNIT REMOTE DV-603/DVF-3060 DVF-3060K 6 6 ÷ When the 6 key is pressed while a tray is open, the tray closes automatically, and then playback begins. Note When a Disc Menu appears on the screen In case of interactive DVDs, a Disc Menu appears on the screen. Then press ENTER to select specific menu you want to play by using Cursor keys. TITLE No. (DVD) CHAPTER No. (DVD) Time display TRACK No. (CD/VCD) ÷ Each press pauses and plays the disc alternately. When a menu screen is recorded on the disc, the menu screen will be displayed when the TOP MENU key or MENU key is pressed. At the menu screen, the menu can be selected by pressing the Cursor keys. DV-603/DVF-3060 TOP MENU DVF-3060K Operations To stop playback MAIN UNIT REMOTE DV-603/DVF-3060 7 7 DVF-3060K RESUME playback When the 7 (Stop) key has been pressed once during playback to stop the playback, and then playback is started again, play will start from the point where the playback had been stopped. This is called the RESUME function. When the 7 (Stop) key is pressed again during stop, the RESUME function is cancelled. RESUME is cancelled when 5 minutes have passed in RESUME status.