Kenwood DVF-3060 User Manual - Page 28

28 Set Up functions Set up menu Set Up functions DV-603/DVF-3060/DVF-3060K (EN/K,P,E,T,M,X,Y) The initial setup of the player, which has been made at the factory, can be changed to the desired setup. 1 During stop mode or resume mode, press MENU key on the remote. DV-603/DVF-3060 MENU DVF-3060K Operations Current setup menu display appears on the screen. 2 Press Cursor up/down (5/∞) keys on the remote to select the item, then press the ENTER key to access the sub features DV-603/DVF-3060 DVF-3060K MULTI CONTROL ENTER (Menu display example) Audio / Subtitle : This sets the language to be used when playing a disc. (If a disc does not contain the recording the (Disc languages) selected language, it is played in the priority language set for each disc.) Menus : This sets the initial setup of language as well as the language used in on-screen messages such as "PLAY". Rating : This can restrict playback of adult-oriented DVD discs that you do not want to be seen by children. However, even when a DVD disc is marked "Adult-oriented" or so on the label, its viewing cannot be restricted unless the restriction level is recorded in the disc itself. Password : The password for rating setting, change, cancellation, etc. is set. TV Aspect : This sets the screen size (4:3 or 16:9 aspect ratio) according to the connected TV. 4 x 3 letterbox : Choose this setting if you would prefer to see movies in their original aspect ratio. You will see the entire frame of the movie, but it will occupy a smaller portion of the screen. This setting may result in the movie ap- pearing with black bars at the top and bottom of the screen. 4 x 3 Pan Scan : Choose this setting if you want the movie to fill the entire screen of your TV. You won't see part of the picture (particularly the right and left edge). Some disc produced in a wide screen format can't be cropped in this fash- ion, which means the black bars would appear at the top and the bottom of the screen. 16 x 9 Widescreen : Choose this setting if your DVD player is connected to a widescreen TV. Dynamic Range : This is set to ON when the volume change should not become overly large, for example when listening late at night. Digital Audio Out : This sets the type of audio output from the digital audio output jack. Linear PCM : The player can output digital signal with maximum sampling rate of 96 kHz from the digital audio output connector. When a DVD disc recorded in high sampling rate PCM is played, this setting makes it possible to select whether the signal is converted into 48 kHz signal. How to use the RETURN key When the RETURN key is pressed, the display returns to the previous screen (STOP mode). DV-603/DVF-3060 RETURN DVF-3060K