Kenwood DVF-3060 User Manual - Page 47

47 In case of difficulty DVD player unit DV-603/DVF-3060/DVF-3060K (EN/K,P,E,T,M,X,Y) Symptom Cause Remedy Playback will not start even after a title is se- ÷ A viewing restriction (RATING) has been set ÷ Check the viewing restriction level (RAT- lected. for the disc. ING) setting. The viewing restriction level (RATING) can- ÷ You have forgotten the viewing restriction not be changed. (RATING) password. ÷ Set the initial setup to the factory setup with the following procedure. 1 In POWER ON condition, keep the 7 (Stop) key and the ¡ (Search) key pressed at the same time. 2 When both keys are pressed, the region code of the unit, the software version, etc. will be displayed on the display. (When nothing is done, the display of this information continues.) 3 Press the POWER ON/OFF switch to go to Power OFF. 4 When Power ON is performed with the POWER ON/OFF switch, the settings become the default factory settings. The voice or subtitle language selected in the ÷ The DVD disc being played does not contain initial setting is not played. the recording of the selected voice or subtitle language. ÷ Use a DVD disc containing the recording of the selected voice or subtitle language. No message appears on the TV screen after ÷ The function for displaying message on the TV ÷ Set On-Screen Messages to on. a key is pressed. screen (On-Screen Messages) is set to off. Menu screen messages are not shown in the ÷ The menu language function (MENU) is not ÷ Set the disc menu language function desired language. set. (MENU) as required. A VCD cannot be played using menus. Remote control unit Symptom Remote control operation is not possible. ÷ The VCD disc being played is not compatible ÷ Menu playback is available only with VCD with P.B.C. discs recorded with P.B.C. Cause ÷ Batteries are exhausted. ÷ The remote control is too far away from the system, the controlling angle is deviated or there is an obstacle in between. Remedy ÷ Replace with new batteries. ÷ Operate the unit inside the remote control- lable range. Inhibition icon Symptom Cause Remedy The inhibition icon is displayed and remote control is not possible. ÷ Playback is restricted intentionally by the software producer. ÷ The operation is inhibited. Please try another operation. Knowledge Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093 licensed for limited viewing uses only. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. [ For U.S.A. and Canada ] Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the connection to the "STANDARD DEFINITION" output. If there are questions regarding our TV set compatibility with this model 525p DVD player, please contact our customer service center. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.