Kenwood KDC-MP435U Instruction Manual - Page 26
Demonstration Mode Setting, Firmware Version Display, CD Read Setting
View all Kenwood KDC-MP435U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Menu system In Standby mode CD Read Setting When there is a problem with playing a CD with special format, this setting plays the CD by force. Display "CD READ1" "CD READ2" Setting Play CD and Audio file. Play CD by force. ⁄ • Some music CDs may not play even in the "CD READ2" mode. In Standby mode Firmware Version Display Displaying the firmware version with the unit. 1 Select the firmware version display mode Push the Control knob towards up or down. Select the "F/W VER" display. 2 Display the firmware version Push the Control knob towards right or left. In Standby mode Demonstration Mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Control knob towards up or down. Select the "DEMO" display. 2 Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. Display "DEMO ON" "DEMO OFF" Setting The Demonstration mode function is ON. Exit Demonstration mode (Normal mode). 26 | English