Kenwood KDC-X589 Instruction Manual - Page 10

General features System Q You can recall the best sound setting preset for different types of music. Fader*4 "FAD" Exit Audio Control mode Rear 15 - Front 15 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. Each time the button is pressed, the sound setting switches. Sound setting User memory Rock Pops Easy Top 40 Jazz Natural Display "USER" "ROCK" "POPS" "EASY" "TOP40" "JAZZ" "NATURAL" • *1 You can control this item when "2ZON" of (page 11) is set to "ON". • *2 You can control this item when (page 25) is set to "SWPRE SW". (KDC-MP5028/ MP528 only) • *3 You can control this item when (page 11) is set to "SW ON". • *4 You can control this item when "2ZON" of (page 11) is set to "OFF". • *5 These items can be adjusted in detail by the following methods. (Function of the KDC-X589) • *6 Source tone memory: The set up value is put in the memory per source. (Detail Audio item is included) 5 Exit Audio Control mode Press any button. Press the button which is not [VOL] knob and [ATT]/ [ANG] button. Adjust the detail of Audio Control 1 Select the Audio item for adjustment By referring to the step 1 - 3 above, select the desired item to be set in detail from the items marked with *5. 2 Enter Detail adjustment mode of Audio Control Press the [VOL] knob for at least 1 second. 3 Select the Detail Audio item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. 4 Adjust the Detail Audio item Turn the [VOL] knob. Bass level Adjustment Item Display Range Bass Center Frequency "BAS F" 40/50/60/70/80/100/ 120/150 Hz Bass Q Factor "BAS Q" 1.00/1.25/1.50/2.00 Bass Extend "B EX" OFF/ON Middle level Adjustment Item Display Middle Center Frequency "MID F" Middle Q Factor "MID Q" Treble level Adjustment Item Display Treble Center Frequency "TRE" Range 0.5/1.0/1.5/2.0 kHz 1.0/2.0 Range 10.0/12.5/15.0/17.5 kHz • User memory: The values set on the (page 10). • Each setting value is changed with the (page 12). First, select the speaker type with the Speaker setting. Audio Control 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Basic Audio item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. 4 Adjust the Basic Audio item Turn the [VOL] knob. Adjustment Item Rear Volume *1 Subwoofer level*2,3,4 Bass level*5,6 Middle level*5,6 Treble level*5,6 Balance Display "R-VOL" "SW L" "BAS L" "MID L" "TRE L" "BAL" Range 0 - 35 -15 - +15 -8 - +8 -8 - +8 -8 - +8 Left 15 - Right 15 10 | English