Kenwood KDC-X589 Instruction Manual - Page 24
Kenwood KDC-X589 - eXcelon Radio / CD Manual
UPC - 019048159106
View all Kenwood KDC-X589 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Menu system In Standby mode 2 Do the step 4 through 7 operation, and enter the Security Code. "APPROVED" is displayed. The unit can be used. Security Code Because authorization by the Security Code is required when it's removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. In Standby mode • The setup Security Code can be done when the (page 29) is set as OFF. • When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the 4 digit number of your choice. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "SECURITY" is displayed. In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob to [FM] or [AM]. Select the "CLK ADJ" display. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is displayed. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 4 Select the digits to enter Push the Control knob to [4] or [¢]. 5 Select the Security Code numbers Push the Control knob to [FM] or [AM]. 3 Adjust the hours Push the Control knob to [FM] or [AM]. Adjust the minutes Push the Control knob to [4] or [¢]. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is displayed. 4 Exit Clock adjustment mode Press the [MENU] button. 8 Do the step 4 through 7 operation, and reenter the Security Code. "APPROVED" is displayed. The Security Code function activates. • When the wrong Code is entered in steps 4 through 6, repeat from step 4. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting LED flashes. LED OFF. Press the Reset button and when it's removed from the battery power source 1 Turn the power ON. 24 | English