Kenwood KDC-X589 Instruction Manual - Page 34

Installation non-Japanese cars Metal mounting strap (commercially available) Firewall or metal support Japanese cars 1 Refer to the section (page 36) and then remove the hard rubber frame. Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. T N Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. N T T/N T: Toyota cars N: Nissan cars Self-tapping screw (commercially available) Screw (M4X8) (commercially available) 8 mm MAX. 3 M5mm 8 mm MAX. 4 M5mm Accessory3...for Nissan car Accessory4 ...for Toyota car • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). • During installation, do not use any screws except for those provided. The use of different screws might result in damage to the main unit. • Damage may occur if a screwdriver or similar tool is used with excessive force during the installations. 34 | English