Kenwood KDC-X591 Instruction Manual - Page 23
Touch Sensor Tone, Manual Clock Adjustment, DSI Disabled System Indicator, Display Illumination - faceplate will not stay on
View all Kenwood KDC-X591 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards up or down. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards up or down. Adjust the minutes Push the Control knob towards right or left. 4 Exit Clock adjustment mode Press the [MENU] button. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting LED flashes. LED OFF. Display Illumination Control This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. Display "DISP ON" "DISP OFF" Setting Keeps the display on. Turns off the display when you perform no operation for 5 seconds. ⁄ • Set the Display Illumination Control when the (page 27) is set to OFF. • When the display is off, pressing any key will turn on the display. • When the display is off, you cannot perform any operation except for the following: • Volume • Attenuator • Selecting the source • Turning off the power • During function control, such as the Menu System, the display stays on. In Standby mode Dimmer Dimming this unit's display automatically when the vehicle light switch is turned ON. Display "DIM AUTO" "DIM OFF" Setting The display dims. The display doesn't dim. English | 23