Kenwood KDC-X591 Instruction Manual - Page 25

In HD Radio mode Receive mode Setting Sets the receive mode. 1 Select the Receive mode Push the Control knob towards up or down. Select the "HDR MODE" display. 2 Enter Receive mode Press the Control knob for at least 1 second. 3 Set the Receive mode Push the Control knob towards up or down. Each time you push the knob, the Receive mode alternates between the modes shown in the table below. Receive mode Auto mode Digital Analog Display "AUTO" "DIGITAL" "ANALOG" Operation Analog broadcasts and digital broadcasts will be switched automatically. When both are being transmitted, the digital broadcast will have priority. Digital broadcasts only. Analog broadcasts only. 4 Exit Receive mode Press the [MENU] button. ⁄ • Even if the Receive mode is set to "AUTO", when the Ball game mode program (non-delayed broadcast program) is received, the Receive mode will automatically switch to Analog broadcast only. In Satellite radio source Electronic Serial Number (ESN) display Displaying the Electronic Serial Number. Display "ESN ⁄ • Electronic Serial Number (ESN) It is important to retain the unit serial number and the electronic Satellite radio Identification number for service activation and potential service changes. Auxiliary Input Display Setting Selecting the display when changing to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX"/"AUX EXT" display. 2 Enter Menu mode Press the [MENU] button. "MENU" is displayed. 3 Select Auxiliary input display setting mode Push the Control knob towards up or down. Select the "NAME SET" display. 4 Enter Auxiliary input display setting mode Press the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed. 5 Select the Auxiliary input display Push the Control knob towards right or left. Each time you push the knob, the display alternates as listed below. • "AUX"/"AUX EXT" • "DVD" • "PORTABLE" • "GAME" • "VIDEO" • "TV" 6 Exit Auxiliary input display setting mode Press the [MENU] button. ⁄ • When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. • You can only set the Auxiliary input display when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. English | 25