Kenwood KDC X592 Instruction Manual - Page 12
Tuner Operation
View all Kenwood KDC X592 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Tuner Operation Station Preset Memory Putting a station in the memory. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 2 Enter Preset Memory mode Select "P.MEM". For how to select Function Control item, refer to (page 6). 3 Select the number to put in the memory Turn the Control knob. 4 Determine the number to put in the memory Press the Control knob. 5 Allow the determined number to take effect Press the Control knob. Cancelling the Preset Memory mode Press the [FNC] button. Preset Tuning Recalling the stations in the memory. 1 Enter Preset Tuning Select mode Turn the Control knob. A station list is displayed. 2 Select a desired station in the memory Turn the Control knob. 3 Recall the station Press the Control knob. Cancelling Preset Tuning Press the [FNC] button. Function of remote control Direct Access Tuning Entering the frequency and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "- - - -" is displayed. 2 Enter the frequency Press the number buttons on the remote control. Example: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press button [0], [9], [2], [1] [0], [8], [1], [0] Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. ⁄ • You can enter the FM band frequency in steps of a minimum of 0.1 MHz. 12 | KDC-X592/ KDC-MP538U