Kenwood KDC X592 Instruction Manual - Page 16
Audio Setup, Speaker Setting - aux
View all Kenwood KDC X592 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Audio Adjustments Audio Setup You can set Sound system , such as follows; Adjustment Item Display Front High Pass Filter "HPF-F" Rear High Pass Filter "HPF-R" Low Pass Filter "LPF" Subwoofer Phase Volume offset Loudness Dual Zone System "SW PHASE" "VOL-OFFSET" "LOUD" "2 ZONE" Range Through/40*1/ 60*1/80/100/ 120/150/180/220*1 Hz Through/40*1/ 60*1/80/100/ 120/150/180/220*1 Hz 50*1/60/80/100*1/120/ Through Hz Reverse (180°)/ Normal (0°) -8 - ±0 (AUX: -8- +8) OFF/ON OFF/ON *1 KDC-X592 only. ⁄ • Volume offset: Sets each source's volume as a difference from the basic volume. • Loudness: Compensates for low and high tones during low volume. (Only the low tone is compensated for when the tuner is selected as a source.) • Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. - Set up the channel of sub source by "Zone2" of (page 6). - Select Main source by [SRC] button. - Adjust the volume of Front channel by [AUD] knob. - Adjust the volume of Rear channel by (page 15) or [5]/[∞] button on the remote control (page 20). - The Audio Control has no effect on sub source. 1 Select the source to adjust For how to select source item, refer to of (page 4). 2 Enter Audio Setup mode Press the [AUD] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [AUD] knob. 4 Adjust the Audio setup item Turn the [AUD] knob. 5 Exit Audio Setup mode Press the [AUD] knob for at least 1 second. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display "OFF" "5/4inch" "6x9/6inch" "O.E.M." 1 Enter Standby Select the "STANDBY" display. For how to select source item, refer to of (page 4). 2 Enter Speaker Setting mode Press the [AUD] knob. "SP SEL" is displayed. 3 Select the Speaker type Turn the [AUD] knob. 4 Exit Speaker Setting mode Press the [AUD] knob. 16 | KDC-X592/ KDC-MP538U