Kenwood KMR-D378BT Instruction Manual - Page 11
Getting Started
View all Kenwood KMR-D378BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Basics Remote control (RC-406) (supplied for ) Remote sensor (Do not expose to bright sunlight.) Getting Started Pull out the insulation sheet when using for the first time. / / / / : Can be remotely controlled with an optionally purchased remote control. / / : Remote control functions are not available. How to replace the battery To Adjust the volume Select a source Turn off the power On the remote control Press VOL or VOL . • Press and hold VOL to continuously increase the volume to 15. Press ATT during playback to attenuate the sound. • Press again to cancel. Press SRC repeatedly. Press and hold SRC to turn off the power. ( Pressing SRC does not turn on the power. ) 1 Select the display language and cancel the demonstration When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], see page 7), the display shows: "SEL LANGUAGE" "PRESS" "VOLUME KNOB" 1 Turn the volume knob to select [ENG] (English) / [SPA] (Spanish) / [FRE] (French), then press the knob. [ENG] is selected for the initial setup. Then, (except for ) the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB". 2 Press the volume knob again. [YES] is selected for the initial setup. 3 Press the volume knob again. "DEMO OFF" appears. 2 Set the clock and date 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [CLOCK], then press the knob. To adjust the clock 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob. Set the time in the order of "Hour" "Minute". 5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob. ENGLISH 5