Kenwood KMR-D378BT Instruction Manual - Page 43
Installing the unit in-dash mounting, Removing the unit, Installing the unit without mounting sleeve
View all Kenwood KMR-D378BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installation/Connection Installing the unit (in-dash mounting) Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied/commercially available). Hook on the top side Orientate the trim plate as illustrated before fitting. Do the required wiring. (Page 38) Use only the specified screws. Using wrong screws might damage the unit. Removing the unit 1 Detach the faceplate. 2 Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out. 3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration. Dashboard of your car Bend the appropriate tabs to hold the sleeve firmly in place. ENGLISH 37