Kenwood KMR-D378BT Instruction Manual - Page 29

Bluetooth® • Refer to the instruction manual of the Bluetooth device for more information. The following operations may differ or be unavailable depending on the connected phone. Auto Pairing When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to [ON]. (Page 26) Press the volume knob to pair once you have confirmed the device name. Bluetooth - Mobile phone Receive a call When there is an incoming call: • / / / / / : [ZONE 2] illuminates in green color and flashes. • The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. (Page 24) During a call: • / / / / / : [ZONE 1] illuminates according to the settings made for [DISPLAY] (page 33) and [ZONE 2] illuminates in green color. • If you turn off the unit or detach the faceplate, Bluetooth is disconnected. To On the faceplate First incoming call... Answer a call Press or the volume knob or one of the number buttons (1 to 6). Reject a call Press . End a call Press . While talking on the first incoming call... Answer another incoming call and hold the current call Press . Reject another incoming Press . call While having two active calls... End current call and activate held call Press . Swap between the Press . current call and held call Adjust the phone volume*1 [00] to [35] (Default: [15]) Turn the volume knob during a call. Switch between handsfree and private talk modes*3 Press 6 IW during a call. *1, *2, *3: See page 24. On the remote control Press . Press . Press . Press . Press . Press . Press . Press VOL *2 or VOL during a call. ( Not available ) ENGLISH 23