Kenwood KMR-M312BT User Manual - Page 17
BLUETOOTH - Mobile phone, Receive a call, Improve the voice quality
View all Kenwood KMR-M312BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
BLUETOOTH® BLUETOOTH - Mobile phone Receive a call When there is an incoming call: - All the buttons and display flash. - The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 16) During a call: - The buttons and display illuminate according to the settings made for [DISPLAY]. ( 21) - If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected. To Answer a call Reject a call On the faceplate Press or the volume knob or one of the number buttons (1 to 6). Press . On the remote control Press . Press . End a call Press or . Press . Adjust the phone volume Turn the volume knob during a call. [00] to [35] (Default: [15]*) • This adjustment will not affect the - volume of the other sources. Switch between hands- Press during a call. free and private talk • Operations may vary according to - modes the connected Bluetooth device. * Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit. Improve the voice quality While talking on the phone... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. To return to the previous setting item, press . MIC GAIN NR LEVEL ECHO CANCEL Default: XX -10 - +10 (-4): The sensitivity of the microphone increases as the number increased. -5 - +5 (0): Adjust the noise reduction level until the least noise is being heard during a phone conversation. -5 - +5 (0): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation. ENGLISH 15