Kenwood KVT-867DVD User Manual - Page 66
Security Code Setup
View all Kenwood KVT-867DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Security Code Setup You can set a security code to protect your receiver system against theft. • When the Security Code function is activated it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 1 Display the Security Code Setup screen Security If Security is not shown, touch Prev. or Next to display it. MENU 4 1 3 Security code set 1 Set 5 DSI 2 On Off 6 2 Start the security code registration Set PassWord 1 1 2 4 5 7 8 0 3 6 9 2 Clear 3 Cancel 4 Enter 1 Enters the numbers to your security code. 2 Clears your entry. 3 Cancels the registration and returns to the Security Code Setup screen. 4 Registers your security code. 3 Enter a security code 0 - 9 1 1 Security 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (page 74) 4 Calls the Setup Menu. 5 Allows you to start security code registration. 6 Turns the DSI function on or off. If turned "On", the burglar alarm lamp flashes when the protection panel is removed. ( On) • If you have already completed the code registration, Set is not available. Input a four-digit number. 4 Register your security code Enter 5 Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation. • If you enter a different security code, the screen returns to Step 3 (for the first code entry). 6 Register the security code again Enter 66 | English Now, your security code is registered. If you press the Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code. See below for details.