Kenwood TK-7360 Operation Manual - Page 10
Basic Operations
![]() |
View all Kenwood TK-7360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
BASIC OPERATIONS SWITCHING POWER ON/ OFF Press to switch the transceiver ON. • A beep sounds and the display illuminates. • If the Transceiver Password function is programmed, "PASSWORD" will appear on the display. Refer to "Transceiver Password", on page 6. Press again to switch the transceiver OFF. ■ Transceiver Password To enter the password: 1 Press / to select a digit. • When using a keypad, simply enter the password digits and proceed to step 4. 2 Press C> to accept the entered digit and move to the next digit. • Press A or # to delete an incorrect digit. Press and hold A or # to delete all digits. 3 Repeat steps 1 and 2 to enter the entire password. 4 Press S or to confirm the password. • If you enter an incorrect password, the transceiver remains locked. ADJUSTING THE VOLUME Press the Volume Up key to increase the volume. Press the Volume Down key to decrease the volume. If Squelch Off has been programmed onto a key, you can use that function to listen to background noise while adjusting the volume level. SELECTING A ZONE AND CHANNEL/GROUP ID Select the desired zone and channel/group ID using the keys programmed as Zone Up/ Zone Down and CH/GID Up/ CH/GID Down. • You can program names for zones and channels/group IDs with up to 10 characters. ■ Home Channel/Group ID You can select your Home channel/group ID by pressing Home CH/GID. Press the key a second time to return to your previous channel/group ID. ■ Direct Channel/Group ID You can quickly select a commonly used channel/group ID by pressing Direct CH/GID 1 ~ Direct CH/GID 4. Press the same key a second time to return to your previous channel/group ID (if the key assignment Direct Ch/GID return is configured as "Enabled"). 6
![](/manual_guide/products/kenwood-tk7360-operation-manual-df75fd0/10.png)