Kenwood TK-7360 Operation Manual - Page 7
Getting Acquainted - programming cable
![]() |
View all Kenwood TK-7360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
GETTING ACQUAINTED FRONT AND REAR VIEWS :@ . ; =B > 2 8 ᶃ (Power) switch Press to switch the transceiver ON or OFF. ᶄ / keys Press to activate their programmable functions {page 5}. ᶅ / keys Press to activate their programmable functions {page 5}. ᶆ TX/RX Indicator Lights red while transmitting and green while receiving a signal. Flashes orange when receiving an optional signaling call. ᶇ Microphone jack Insert the microphone plug into this jack. ᶈ Status Indicator Lights blue during a specified mode, based on dealer programming. ᶉ / S / A / / ■ keys Press to activate their programmable functions {page 5}. ᶊ Speaker Internal speaker. ᶋ PTT switch Press this switch, then speak into the microphone to call a station. ᶌ Antenna connector Connect the antenna to this connector. ᶍ ACC connector Connect the ACC to this connector, via the KCT-60. ᶎ External speaker jack Connect an external speaker to this jack. ᶏ Power input connector Connect the DC Power Cable to this connector. 3
![](/manual_guide/products/kenwood-tk7360-operation-manual-df75fd0/7.png)