Kenwood VR 605 Instruction Manual - Page 28
Surround play, When the analog signal or the digital signal except
View all Kenwood VR 605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Ambience effects Surround play The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark. DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC can be used when playing video, DVD, or LD software bearing the mark. LISTEN MODE INPUT MODE INPUT SELECTOR INPUT SELECTOR LISTEN MODE Preparations •Turn ON related components. •Complete "Preparing for surround sound" (speaker settings).& • Use the INPUT SELECTOR to select the component you wish to play back with surround sound. • Use the INPUT MODE key to select the input mode (analog or digital) for the source you wish to play back. 8 • Noise will be produced when a DTS source is played by selecting the analog input. 1Start playing the video software. 2Press the LISTEN MODE key to select the listening mode. The listening mode settings are stored separately for each input. If the input mode is set to full auto ("AUTO DETECT" lights), the receiver selects the optimal listening mode automatically based on the type of input signal and the speaker settings. Each press of the LISTEN MODE key switches the setting as listed below. The listening mode settings are different depending on the type of input signal. When the DOLBY DIGITAL signal is input: (The DOLBY DIGITAL, PRO LOGIC, or STEREO indicator lights up.) 1 DOLBY DIGITAL : DOLBY DIGITAL surround. 2 PL II MOVIE : PRO LOGIC II surround MOVIE mode. (The PRO LOGIC indicator lights up.) 3 PL II MUSIC : PRO LOGIC II surround MUSIC mode. (The PRO LOGIC indicator lights up.) 4 PRO LOGIC : PRO LOGIC II surround PRO LOGIC mode. (The PRO LOGIC indicator lights up.) 5 STEREO : Normal stereo playback. When you select DOLBY DIGITAL "DOLBY DIGITAL" will scroll from right to left. When the DTS signal is input: (The DTS indicator lights up.) 1 DTS : DTS surround 2 STEREO : Normal stereo playback When the analog signal or the digital signal (except for DOLBY DIGITAL or DTS signal) is input: 1 PL II MOVIE : PRO LOGIC II surround MOVIE mode. (The PRO LOGIC indicator lights up.) 2 PL II MUSIC : PRO LOGIC II surround MUSIC mode. (The PRO LOGIC indicator lights up.) 3 PRO LOGIC : PRO LOGIC II surround PRO LOGIC mode. (The PRO LOGIC indicator lights up.) 4 ARENA : DSP Surround ARENA mode. 5 JAZZ CLUB : DSP Surround JAZZ CLUB mode. 6 THEATER : DSP Surround THEATER mode. 7 STADIUM : DSP Surround STADIUM mode. 8 DISCO : DSP Surround DISCO mode. 9 STEREO : Normal stereo playback. Sound is produced from the two front channels only. (The STEREO indicator lights up.) • Dolby Digital or DTS signal having more channels than the maximum number of playback channels available using the receiver's current settings is input, downmixing is performed to match the number of available channels. 3Adjust the volume. Notes • Depending on the type of the signal or speaker setting, some listening modes cannot be selected. • When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital. • To enjoy Dolby Digital surround (as well as all the other listening modes) from a single component, be sure to use a Dolby Digital compatible source component. 28 EN