Kenwood VR 605 Instruction Manual - Page 35

Specifications For the U.S.A and Canada AUDIO section (VR-605/615) Rated power output during STEREO operation 100 watts per channel minimum RMS, both channels driven, at 8Ω from 40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC) Effective power output during SURROUND operation FRONT (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channel driven 100 W + 100 W CENTER (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channel driven 100 W SURROUND (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channel driven 100 W + 100 W SUBWOOFER (80 Hz, 0.7% T.H.D. at 8Ω one channel driven) (VR-615 100 W Total harmonic distortion 0.05% (1 kHz, 50 W, 8Ω) Frequency response CD 20 Hz ~ 70 kHz, +0 dB, -3.0 dB Signal to noise ratio (IHF'66) CD 95 dB Input sensitivity / impedance CD 550 mV / 47 kΩ DVD/6CH INPUT (VR-615 550 mV / 47 kΩ Output level / impedance TAPE REC 550 mV / 1 kΩ PRE OUT (SUBWOOFER) (VR-605 1.5 V / 2.2 kΩ Tone control BASS 10 dB (at 100 Hz) TREBLE 10 dB (at 10 kHz) Loudness control VOLUME at -30dB level 8 dB (at 100 Hz) For other countries AUDIO section (KRF-V5060D/V5560D) Rated power output during STEREO operation 100 watts per channel minimum RMS, both channels driven, at 8Ω from 40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC) Effective power output during SURROUND operation FRONT (1 kHz, 0.7% T.H.D. at 8Ω one channel driven 100 W + 100 W CENTER (1 kHz, 0.7% T.H.D. at 8Ω one channel driven 100 W SURROUND (1 kHz, 0.7% T.H.D. at 8Ω one channel driven 100 W + 100 W SUBWOOFER (80 Hz, 0.7% T.H.D. at 8Ω one channel driven) (KRF-V5560D 100 W Total harmonic distortion 0.05% (1 kHz, 50 W, 8Ω) Frequency response CD 20 Hz ~ 70 kHz, +0 dB, -3.0 dB Signal to noise ratio (IHF'66) CD, TUNER, AUX, TAPE 95 dB Input sensitivity / impedance CD 550 mV / 47 kΩ DVD/6CH INPUT (KRF-V5060D 550 mV / 10 kΩ Output level / impedance TAPE REC 550 mV / 1 kΩ PRE OUT (SUBWOOFER) (KRF-V5060D 1.5 V / 2.2 kΩ Tone control BASS 10 dB (at 100 Hz) TREBLE 10 dB (at 10 kHz) Loudness control VOLUME at -30dB level 8 dB (at 100 Hz) AUDIO section (KRF-V4060D) Effective power output during STEREO operation 1 kHz, 0.7% T.H.D.,at 8 50 W + 50 W Rated power output during STEREO operation 40 watts per channel minimum RMS, both channels driven, at 8Ω from 40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC) Effective power output during SURROUND operation FRONT (1 kHz, 0.7% T.H.D. at 8Ω one channel driven 50 W + 50 W CENTER (1 kHz, 0.7% T.H.D. at 8Ω one channel driven 50 W Caution : Read this page carefully to ensure safe operation. SURROUND (1 kHz, 0.7% T.H.D. at 8Ω one channel driven 50 W + 50 W Total harmonic distortion 0.15% (1 kHz, 20 W, 8Ω) Frequency response CD 20 Hz ~ 70 kHz, +0 dB, -3.0 dB Signal to noise ratio (IHF'66) CD, TUNER, AUX, TAPE 95 dB Input sensitivity / impedance CD 400 mV / 47 kΩ Output level / impedance TAPE REC 400 mV / 1 kΩ PRE OUT (SUBWOOFER 1.5 V / 2.2 kΩ Tone control BASS 10 dB (at 70 Hz) TREBLE 10 dB (at 10 kHz) Loudness control VOLUME at -30dB level 8 dB (at 100 Hz) DIGITAL AUDIO section Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 96 kHz Input level / impedance / wave length Optical 15 dBm ~ -21 dBm), 660 nm ±30 nm Coaxial 0.5 Vp-p / 75 Ω VIDEO section VIDEO inputs / outputs VIDEO (composite 1 Vp-p / 75 Ω FM tuner section Tuning frequency range 87.5 MHz ~ 108.0 MHz Usable sensitivity (MONO) VR-605/615 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB) KRF-V5060D/V4060D/V5560D 1.6 µV (75 Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB) 50dB quieting sensitivity STEREO 28 µV (75 Ω)/ 40.2 dBf Total harmonic distortion (1 kHz) MONO 0.5% (71.2 dBf input) STEREO 0.7% (71.2 dBf input) Signal to noise ratio (1 kHz, 75 kHz DEV.) MONO 75 dB (71.2 dBf input) STEREO 68 dB (71.2 dBf input) Stereo separation (1 kHz 40 dB Selectivity (±400 kHz) VR-605/615 70 dB KRF-V5060D/V4060D/V5560D 50 dB Frequency response 30 Hz ~ 15kHz), +0.5 dB, -3.0 dB AM tuner section Tuning frequency range 10 kHz step (VR-605/615 530 kHz ~ 1,700 kHz 10 kHz step (KRF-V5060D/V4060D/V5560D) ...530 kHz ~ 1,610 kHz 9 kHz step (KRF-V5060D/V4060D/V5560D) ...531 kHz ~ 1,602 kHz Usable sensitivity (30% mod., S/N 20dB) (VR-606/615 16 µV / (600 µV/m) Usable sensitivity (KRF-V5060D/V5560D/V4060D 16 µV / (600 µV/m) Signal to noise ratio (30% mod. 1 mV input 50 dB GENERAL Power consumption VR-605/615 2.2 A KRF-V5060D/V5560D 280W KRF-V4060D 200W AC outlet SWITCHED VR-605/615 total 150 W, 1.25 A max.) KRF-V5060D/V4060D/V5560D total 90 W max.) Dimensions W : . 440 mm (17-5/16") H : 143 mm (5-5/8") D : 303 mm (11-15/16") Weight (Net) VR-605/615 7.7 kg (17.00 lb) KRF-V5060D/V5560D 8.8 kg (19.40 lb) KRF-V4060D 7.9 kg (17.41 lb) 35 EN