Kenwood VR-6060 User Manual - Page 18

Setting up the system Connecting the RF antenna and external IR Repeater (For VR-6060 only) The remote control for this receiver has the RF (radio frequency) and IR (infrared rays) transmission function. IR repeaters enables you to control components located in cabinets or behind glass doors. You can enjoy a wider remote control signal range by placing the RF antenna and IR repeater away from the receiver. KENWOOD components (except DVD player): System control Other components: (Registering setup codes) IR REPEATER & fl IR repeaters Monitor TV IR REPEATER OUT RF antenna (For RF Transmitter, select either 1. RF REMOTE Band 1, or 2. RF REMOTE Band 2) Connecting IR repeater 1 Connect the IR repeater to the device as described in the repeater's manual. 2 Connect the IR repeater cable(s) to the IR REPEATER OUT jack(s). Notes • IR repeaters send a signal similar to the device's own remote control. Xantech repeaters (models 282-00, 286-00, or 283-00) are compatible with your new audio-video receiver. Connecting the RF remote antenna 1 Insert the jack of the provided RF remote antenna into the RF REMOTE ANTENNA jack. 2 Place the antenna wire vertically and fix it. • Place the antenna away from the metallic panel. 18 EN RF REMOTE ANTENNA Shape of plug to be connected. IR REPEATER OUT Mono Mini Plug Sleeve Tip IR OUT SPECIFICATION: Terminal To Tip To Sleeve IR REPEATER OUT Signal Ground