Kenwood VR-6060 User Manual - Page 42

Specifications For the U.S.A and Canada AUDIO section (VR-6060) Rated power output during STEREO operation 100 watts per channel minimum RMS, both channels driven, at 8 Ω from 20 Hz to 20 kHz with no more than 0.09% total harmonic distortion. (FTC) Effective power output during SURROUND operation FRONT (20 ~ 20 kHz, 0.09 % T.H.D. at 8 Ω one channel driven 100 W + 100 W CENTER (20 ~ 20 kHz, 0.09 % T.H.D. at 8 Ω one channel driven 100 W SURROUND (20 ~ 20 kHz, 0.7 % T.H.D. at 8 Ω one channel driven 100 W + 100 W SURROUND BACK/SUBWOOFER (20 ~ 20 kHz, 0.09 % T.H.D. at 8 Ω one channel driven 100 W Total harmonic distortion 0.009 % (1 kHz, 50 W, 8 Ω) Frequency response Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH 10 Hz ~ 100 kHz, +0 dB ~ -3.0 dB PHONO 'RIAA' response 40 Hz ~ 20 kHz, +1.5 dB ~ -3.0 dB Maximum input level PHONO (MM 45 mV, 1 % T.H.D. at 1 kHz Signal to noise ratio (IHF'66) PHONO (MM 75 dB Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH 95 dB Loudness control VOLUME at -30 dB level 6 dB (100 Hz) Input sensitivity / impedance PHONO (MM 6.0 mV / 47 kΩ Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH 500 mV / 47 kΩ Output level / impedance TAPE REC 500 mV / 1 kΩ PRE OUT (SURROUND BACK CHANNEL 2.5 V / 1 kΩ PRE OUT (SUBWOOFER 2.5 V / 1 kΩ Tone control BASS 10 dB (at 100 Hz) TREBLE 10 dB (at 10 kHz) Caution : Read this page carefully to ensure safe operation. For other countries AUDIO section (KRF-V8060D) Effective power output during STEREO operation 1 kHz, 10 %, 8 110 W + 110 W Rated power output during STEREO operation 100 watts per channel minimum RMS, both channels driven, at 8 Ω from 20 Hz to 20 kHz with no more than 0.09% total harmonic distortion. (FTC) Effective power output during SURROUND operation FRONT (1 kHz, 10% T.H.D. at 8 Ω one channel driven 110 W + 110 W CENTER (1 kHz, 10% T.H.D. at 8 Ω one channel driven 110 W SURROUND (1 kHz, 10% T.H.D. at 8 Ω one channel driven 110 W + 110 W SURROUND BACK/SUBWOOFER (1 kHz, 10% T.H.D. at 8 Ω one channel driven 110 W Total harmonic distortion 0.009% (1 kHz, 50 W, 8 Ω) Frequency response Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH 10 Hz ~ 100 kHz, +0 dB ~ -3.0 dB PHONO 'RIAA' response 40 Hz ~ 20 kHz, 1.5 dB ~ -3.0 dB Maximum input level PHONO (MM 45 mV, 1 % T.H.D. at 1 kHz Signal to noise ratio (IHF'66) PHONO (MM 75 dB Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH 95 dB Loudness control VOLUME at -30 dB level 6 dB (100 Hz) Input sensitivity / impedance PHONO (MM 6.0 mV / 47 kΩ Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH 500 mV / 47 kΩ Output level / impedance TAPE REC 500 mV / 1 kΩ PRE OUT (SURROUND BACK CHANNEL 2.5 V / 1 kΩ PRE OUT (SUBWOOFER 2.5 V / 1 kΩ Tone control BASS 10 dB (at 100 Hz) TREBLE 10 dB (at 10 kHz) 42 EN