Kenwood VR-6060 User Manual - Page 43

Specifications DIGITAL AUDIO section Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 96 kHz Input level / impedance / wave length Optical 15 dBm ~ -24 dBm), 660 nm ±30 nm Coaxial 0.5 Vp-p / 75 Ω VIDEO section VIDEO inputs / outputs VIDEO (composite 1 Vp-p / 75 Ω S VIDEO inputs /outputs S VIDEO (luminance signal 1 Vp-p / 75 Ω S VIDEO (chrominance signal 0.286 Vp-p / 75 Ω COMPONENT VIDEO inputs /outputs COMPONENT VIDEO (luminance signal 1 Vp-p / 75 Ω COMPONENT VIDEO (CB/CR-signal 0.32 Vp-p / 75 Ω FM tuner section Tuning frequency range 87.5 MHz ~ 108.0 MHz Usable sensitivity (MONO) VR-6060 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB) KRF-V8060D ...1.6 µV (75 Ω)/ 15.2 dBf (75 kHz dev, SINAD 30 dB) 50 dB quieting sensitivity STEREO 28 µV (75 Ω)/ 40.2 dBf Total harmonic distortion MONO (1 kHz, 75 kHz dev 0.5% (65 dBf input) STEREO (1 kHz, 67.5 + 6.75 kHz dev) ......... 0.7% (65 dBf input) Signal to noise ratio MONO (1 kHz, 75 kHz dev 75 dB (65 dBf input) STEREO (1 kHz, 67.5 + 6.75 kHz dev) ....... 68 dB (65 dBf input) Stereo separation (1 kHz 40 dB Selectivity (±400 kHz) (VR-6060 70 dB (KRF-V8060D 50 dB Frequency response (30 Hz ~ 15 kHz 0.5 dB, -3.0 dB AM tuner section Tuning frequency range 10 kHz step 530 kHz ~ 1,700 kHz (VR-6060) 10 kHz step 530 kHz ~ 1,610 kHz (KRF-V8060D) 9 kHz step 531 kHz ~ 1,602 kHz (KRF-V8060D) Usable sensitivity (30% mod, S/N 20 dB 16 µV / (600 µV/m) Signal to noise ratio (30% mod, 400 Hz 50 dB (60 dBµ VEMF input) GENERAL Power consumption VR-6060 3 A KRF-V8060D 300 W AC outlet SWITCHED VR-6060 total 150 W, 1.25 A max.) KRF-V8060D total 90 W max.) Dimensions W : 440 mm (17-5/16") H : 159 mm (6-1/4") D : 392 mm (15-7/16") Weight (Net) VR-6060 9.4 kg (20.7 lb) KRF-V8060D 10.0 kg (22.0 lb) Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature). 43 EN