Kenwood VR-6060 User Manual - Page 20
Preparing for surround sound, Speaker settings
View all Kenwood VR-6060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Preparing for surround sound Speaker settings To enable you to obtain optimum enjoyment from the receiver's listening modes, make sure to complete the speaker settings (subwoofer, front, center, and surround speakers) as described below. POWER ON/STANDBY (VR-6060) ON/STANDBY (KRF-V8060D) SETUP MULTI CONTROL POWER ON/OFF (KRF-V8060D) SET UP POWER Joystick (MULTI CONTROL 5 / ∞, DOWN 2 / UP3) 1 Turn on the power to this receiver by pressing the POWER ON/STANDBY (for VR-6060) or POWER ON/OFF and ON/ STANDBY (for KRF-V8060D) key or POWER key. 2 Press the SETUP key to enter the SETUP mode. The Surround Back and Subwoofer speaker output selections are displayed as follows: 1 6ch AMP SB 2 6ch AMP SW Use the MULTI CONTROL knob or Joystick (5/∞) to select the speakers. Press the SETUP key to proceed to the next SET UP selection. Use M/? keys or Joystick (2/ 3) for the following displays. 1 SP SETUP 2 TEST TONE 3 SP DISTANCE 4 DISP MODE 5 EXIT The flow of the SET UP is as follows: SP SETUP TEST TONE SP DISTANCE DISP MODE EXIT Subwoofer Front Center Surround Surround Back Surround Mix Subwoofer Re-mix T. TONE T. TONE AUTO MANUAL L L C R C SR SB R SL SR SW SB SL SW Front Left Center Front Right Surround Right Surround Back Surround Left Subwoofer Display Selector Display Listen 3 Select a speaker system. 1 Select the SP SETUP and press the SETUP key again so that the subwoofer setting indication "SUBW ON" appears. SP MUTE OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 THX L ACTIVE EQ. MATRIX C SW R A B CLIP COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII Surround EX LFE SL S SB SR RDS RTY AUTO MEMO STEREO TUNED 20 EN 2 Use the MULTI CONTROL knob or Joystick (5/∞) to select the appropriate subwoofer setting. 1 SUBW ON : Subwoofer setting mode to the receiver is ON. 2 SUBW OFF : Subwoofer setting mode to the receiver is OFF. • The initial setting is "SUBW ON". • When the setting "SUBW OFF" is selected, the front speakers are automatically set to "FRNT LARGE" and the procedure skips to step 6. Before step 6, press the SETUP key to accept the setting. • When subwoofer output sound is required, select "FRNT NORMAL", or select both "FRNT LARGE" and "SW RE-MIX ON". • After setting SW (subwoofer) from OFF to ON, 6ch AMP setup display will appear to enable you to re-select either SW or SB from the surround back or subwoofer speaker terminal. 3 Press the M key or Joystick (3) to accept the setting. • The front speakers setting indication "FRNT" appears. SP MUTE OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 THX L ACTIVE EQ. MATRIX C SW R A B CLIP COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII Surround EX LFE SL S SB SR RDS RTY AUTO MEMO STEREO TUNED 4 Use the MULTI CONTROL knob or Joystick (5/∞) to select the appropriate front speakers setting. 1 FRNT LARGE 2 FRNT NORMAL : Large front speakers are connected to the receiver. : Average size front speakers are connected to the receiver. • For "FRNT LARGE" selection, no sound will be heard from subwoofer speaker even when it is set to ON. However, if you select "SW RE-MIX ON" when subwoofer is selected, you will be able to hear sound from the subwoofer. When in STEREO mode, the sound goes directly to front speaker. 5 Press the M key or Joystick (3) to accept the setting. • The center speaker setting indication "CNTR" appears. 6 Use the MULTI CONTROL knob or Joystick (5/∞) to select the appropriate center speaker setting. If you selected "LARGE" as the front speakers setting, 1 CNTR LARGE : A large center speaker is connected to the receiver. 2 CNTR NORMAL : An average size center speaker is connected to the receiver. 3 CNTR OFF : Center speaker setting mode to the receiver is OFF. If you selected "NORMAL" as the front speakers setting, 1 CNTR ON : Center speaker setting mode to the receiver is ON. 2 CNTR OFF : Center speaker setting mode to the receiver is OFF. 7 Press the M key or Joystick (3) again to accept the setting. • The surround speaker setting indication "SURR" appears. 8 Use the MULTI CONTROL knob or Joystick (5/∞) to select the appropriate surround speaker setting. If you selected "LARGE" as the center speaker setting, 1 SURR LARGE : Large surround speakers are con- nected to the receiver. 2 SURR NORMAL : Average size surround speakers are connected to the receiver. 3 SURR OFF : Surround speaker setting mode to the receiver is OFF.