Kenwood X590 Instruction Manual - Page 13
Adjusting the detail of Audio, Control
UPC - 019048167286
View all Kenwood X590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Function of the KDC-X590 Adjusting the detail of Audio Control Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail. 1 Select the Basic Audio item Select the desired item to be set in detail from followings; • Bass level • Middle level • Treble level For how to select Basic Audio items, see (page 12). 2 Enter Detail adjustment mode of Audio Control Press the [VOL] knob for at least 1 second. 3 Select the Detail Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 4 Adjust the Detail Audio item Turn the [VOL] knob. Bass level Adjustment Item Display Bass Center Frequency "BAS F" Bass Q Factor Bass Extend "BAS Q" "B EX" Range 40/50/60/70/80/100/ 120/150 Hz 1.00/1.25/1.50/2.00 OFF/ON Middle level Adjustment Item Display Middle Center Frequency "MID F" Middle Q Factor "MID Q" Range 0.5/1.0/1.5/2.0 kHz 1.0/2.0 Treble level Adjustment Item Display Treble Center Frequency "TRE" Range 10.0/12.5/15.0/17.5 kHz 5 Exit the Detail Audio Control mode Press the [VOL] knob for at least 1 second. • When you set the Bass Extend to ON, low frequency response is extended by 20%. • You can exit the Audio Control mode at anytime by pressing any button except for [VOL] and [ATT] buttons. English | 13