Kenwood X991 Instruction Manual - Page 53
Internal Memory Format, Demonstration mode setting, Firmware version display
View all Kenwood X991 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
In Standby mode Firmware version display Displaying the firmware version with the unit. Turn the Control knob. Select the "F/W Version : " display. In Internal Memory source Internal Memory Format Perform format to delete all audio files stored in internal memory. ⁄ • The content of formatted memory cannot be restored. Be careful when formatting. 1 Enter Internal Memory Press the [SRC] button. Select the "Internal Memory" display. 2 Enter Menu mode Using the Control knob, select "MENU". For the operation method, refer to (page 11). 3 Select the Internal Memory Format Turn the Control knob. Select the "INT.MEM.Format" display. 4 Enter the Formatting mode Press the Control knob for at least 1 second. "Format?" is displayed. 5 Start format Select "YES" using the Control knob. "Format..." display blinks. When the formatting finishes, "Completed" is displayed. 6 Exit Formatting mode Press the [FNC] button. In Standby mode Demonstration mode setting Sets the demonstration mode. 1 Select the Demonstration mode Turn the Control knob. Select the "DEMO Mode" display. 2 Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. Display Setting "DEMO Mode : ON" The Demonstration mode function is ON. "DEMO Mode : OFF" Exit Demonstration mode (Normal mode). English | 53