KitchenAid KBZU122TSS Use and Care Guide - Page 6
Cabinet Cutout Dimensions
View all KitchenAid KBZU122TSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Built-In Outdoor Side Burner Enclosure The enclosure for the built-in outdoor side burner is to be a minimum of 11" (28.0 cm) high x 23" (58.4 cm) deep x 14" (35.6 cm) wide for front to back model and 11" (28.0 cm) high x 17" (43.2 cm) deep x 25" (63.5 cm) wide for side by side model. Cabinet Cutout Dimensions Counter or support surfaces must be level. The installation of this grill must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NPFA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2. Copies of the standards listed may be obtained from: CSA International 8501 East Pleasant Valley Rd. Cleveland, Ohio 44131-5575 NOTE: The outdoor side burner drops into the enclosure opening and is supported by its side flanges. No bottom support is needed. The dimension chart and illustration below include cutout dimensions and minimum spacing requirements for all built-in outdoor products. The illustration is for reference. The design of your cabinet layout can be personalized, but the dimensions for the cutouts and minimum spacing must be followed. 3" to o(7p.e6ncmho)omdin. C C E 1to2"an(3y0a.5cccems)smoriyn. E K (239.2¹⁄₈c"m) K (12.7 c5m" ) min. WDraarwmeirng J B SSBoieurdarenr ers D GReriflrlsesohrment Centers Access Doors Utility oTDrrraaswher 20⁷⁄₈" (53.0 cm) L 2¹⁄₂" (6.4 cm) min. K K F M 1tao2c"caenmsyisno.ry D (3.8 c1m¹⁄₂") min. 20⁵⁄₈" (52.4 cm) Refrigerator or Ice Maker K G HA 6