KitchenAid KDTM704ESS Use & Care Guide - Page 13

Dishwasher Features

Page 13 highlights

Dishwasher Features Your KitchenAid dishwasher may have some or all of these features. ProScrub® Option Wash Area The ProScrub® option wash area is located at the back of the lower level rack and the front corners of the upper level rack. To remove, fully extend rack until it stops. Then, open the track stops on each side and lift to remove. Low profile items such as serving utensils and silverware may be loaded on the third level rack. A A. Back of dishwasher NOTE: You must select the ProScrub® or ProScrub® Upper (on some models) option to use these features. Make sure items do not interfere with the water feed tube, spray arms, or the lower rack ProScrub® spray jets. ■ Keep the last tine row in the back of the lower rack in the 60° angled position when using the ProScrub® option. ■ In the back of the lower rack, load pans, casserole dishes, etc. with the soiled surfaces facing the ProScrub® spray jets and resting on the last row of tines in the angled position. ■ Only one row of items may face the ProScrub® spray jets. Stacking, overlapping or nesting items will keep the ProScrub® spray jets from contacting all of the surfaces. ■ When using ProScrub® Upper place tall or oddly shaped glasses or bottles in the front corners of the upper rack face down. It is best to load these items in between rows of tines. Silverware Basket Silverware basket lids: Use silverware basket lids to provide optimal spacing and best cleaning performance. NOTE: If your silverware does not fit into the designated slots, push tabs inward on either end and lift lid off of the silverware baskets. Mix silverware types to keep them separated. Load knives down, forks up, and alternate spoons for best cleaning results. Easy To Remove Third Level Rack (on some models) If additional space is needed in the upper rack, the third level rack can easily be removed. SURE-HOLD® Cup and Stemware Holder Fold down the extra shelf on the left-hand or right-hand side of the upper level rack to hold additional cups, stemware or long items such as utensils and spatulas. FLEXI-FOLD DOWN™ Flexible Tines The row of tines on the left-hand and right-hand sides of the top rack can be adjusted to make room for a variety of dishes. To adjust the fold-down tines: 1. Grasp the tip of the tine that is in the tine holder. 2. Gently push the tine out of the holder. 3. Lay the tines down, toward the center of the rack. NOTE: The bottom rack may also have 1 or 2 rows of flexible tines located in the back of the rack. Follow the same instructions to adjust. Premium Adjustable 2-Position Top Rack You can raise or lower the top rack to fit tall items in either the top or bottom rack. Adjusters are located on each side of the top rack. Each adjuster has 2 preset positions. To raise the rack, press both rack adjusters and lift the rack until it is in the up position and level. To lower the rack, press both rack adjusters and slide the rack to its down position and level. A.Track stop B.Track 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

13
Dishwasher Features
Your KitchenAid dishwasher may have some or all of these features.
ProScrub
®
Option Wash Area
The ProScrub
®
option wash area is located at the back of the lower
level rack and the front corners of the upper level rack.
NOTE:
You must select the ProScrub
®
or ProScrub
®
Upper (on
some models) option to use these features. Make sure items do not
interfere with the water feed tube, spray arms, or the lower rack
ProScrub
®
spray jets.
Keep the last tine row in the back of the lower rack in the
60° angled position when using the ProScrub
®
option.
In the back of the lower rack, load pans, casserole dishes, etc.
with the soiled surfaces facing the ProScrub
®
spray jets and
resting on the last row of tines in the angled position.
Only one row of items may face the ProScrub
®
spray jets.
Stacking, overlapping or nesting items will keep the ProScrub
®
spray jets from contacting all of the surfaces.
When using ProScrub
®
Upper place tall or oddly shaped
glasses or bottles in the front corners of the upper rack face
down. It is best to load these items in between rows of tines.
Silverware Basket
Silverware basket lids:
Use silverware basket lids to provide optimal spacing and best
cleaning performance.
NOTE:
If your silverware does not fit into the designated slots,
push tabs inward on either end and lift lid off of the silverware
baskets. Mix silverware types to keep them separated. Load knives
down, forks up, and alternate spoons for best cleaning results.
Easy To Remove Third Level Rack (on some models)
If additional space is needed
in the upper rack, the third
level rack can easily be
removed.
To remove, fully extend rack until it stops. Then, open the track
stops on each side and lift to remove.
Low profile items
such as serving
utensils and
silverware may be
loaded on the third
level rack.
SURE-HOLD
®
Cup and Stemware Holder
Fold down the extra shelf on the left-hand or right-hand side of the
upper level rack to hold additional cups, stemware or long items
such as utensils and spatulas.
FLEXI-FOLD DOWN™ Flexible Tines
The row of tines on the left-hand and
right-hand sides of the top rack can
be adjusted to make room for a
variety of dishes.
To adjust the fold-down tines:
1.
Grasp the tip of the tine that is in
the tine holder.
2.
Gently push the tine out of the
holder.
3.
Lay the tines down, toward the
center of the rack.
NOTE:
The bottom rack may also
have 1 or 2 rows of flexible tines located in the back of the rack.
Follow the same instructions to adjust.
Premium Adjustable 2-Position Top Rack
You can raise or lower the top rack to fit tall items in either the top
or bottom rack. Adjusters are located on each side of the top rack.
Each adjuster has 2 preset positions.
To raise the rack,
press both rack adjusters and lift the rack until it
is in the up position and level.
To lower the rack,
press both rack
adjusters and
slide the rack to
its down position
and level.
A. Back of dishwasher
A
A.Track stop
B.Track