KitchenAid KEBS278SSS Technical Guide - Page 54
Electrical Shock Hazard
UPC - 883049034867
View all KitchenAid KEBS278SSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4. To remove the oven temperature sensor: a) Remove the screws from the sensor bracket. Temperature Sensor Screws d) Remove the twelve screws from the lower rear cover and remove the cover. Lower Rear Cover (12 Screws) WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. b) Remove the oven from its mounting location (see "Installation Information" in Section 2) and pull it forward so that you can access the top cover. c) Remove the six screws from the top cover and remove the cover. Top Cover Screws (3 of 6) e) Disconnect the sensor wire connector from the wiring harness. f) Push the sensor wire connector through the oven liner hole from the rear of the oven. Oven Liner Hole Temperature Sensor Connector g) Pull the temperature sensor connector out of the hole and remove the sensor. 4-28 Remove Temperature Sensor