KitchenAid KODC504PPS Installation Instructions - Page 13

Excessive Weight Hazard, Use two or more people to move and install oven., Failure to do so can

Get KitchenAid KODC504PPS PDF manuals and user guides View all KitchenAid KODC504PPS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

WARNING Excessive Weight Hazard Use two or more people to move and install oven. Failure to do so can result in back or other injury. 1. Using two or more people, lift the lower oven by the side handles located on the right and left side of the oven. Gently insert into the cabinet cutout. 2. Place left bracket on top of the lower oven and against the left cabinet wall. 3. Place right bracket on top of the lower oven and against the right cabinet wall. IMPORTANT: Make sure there is contact between the lower oven and the lower flanges of the bracket. NOTE: For bracket installation, the maximum interior cabinet width is 2311/16" (60.1 cm). 4. For standard installation, align the front flange of both left and right brackets to the front cabinet, using a flat surface. A B A A. Front aesthetic panel For Flush installation align the front aesthetic panel to the cabinet and place the bracket frontal flange against the rear side of the aesthetic panel. 5. Assure to fix the two brackets in an horizontal position and align one each other. 6. Once the bracket is aligned, screw the bracket to the side wall with twelve of the 4 x 12 mm screws. A. Left bracket B. Right bracket A A A. Front flange of the bracket of Double Oven 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
13
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
1.
Using two or more people, lift the lower oven by the side
handles located on the right and left side of the oven. Gently
insert into the cabinet cutout.
2.
Place left bracket on top of the lower oven and against the
left cabinet wall.
3.
Place right bracket on top of the lower oven and against the
right cabinet wall.
IMPORTANT:
Make sure there is contact between the lower
oven and the lower flanges of the bracket.
NOTE:
For bracket installation, the maximum interior cabinet
width is
23
11
/
16
" (60.1 cm).
4.
For standard installation, align the front flange of both left
and right brackets to the front cabinet, using a flat surface.
For Flush installation align the front aesthetic panel to the
cabinet and place the bracket frontal flange against the rear
side of the aesthetic panel.
5.
Assure to fix the two brackets in an horizontal position and
align one each other.
6.
Once the bracket is aligned, screw the bracket to the side
wall with twelve of the 4 x 12 mm screws.
A
B
A. Left bracket
B. Right bracket
A
A
A.
Front flange of the bracket of Double Oven
A
A. Front aesthetic panel