KitchenAid KPCG100OB Use & Care Guide - Page 29
Adjusting The Cutting Burrs, For Wear
UPC - 883049061917
View all KitchenAid KPCG100OB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
CARE AND CLEANING 8. Place the faceplate assembly onto the motor housing. Make sure the numbers on grind level ring are positioned across the top of the assembly. Using your fingers, tighten the faceplate screws by turning them clockwise. Alternate tightening the screws, keeping them even - do not completely tighten one screw before tightening the other. Adjusting The Cutting Burrs For Wear The cutting burrs are made of highquality stainless steel for exceptional longevity. After prolonged use, however, the burrs might require adjustment to compensate for wear. If your grinds - especially espresso - are not as fine as they used to be, an adjustment probably needs to be made. Please see "Adjusting the Cutting Burrs" on page 16 for information on adjusting the burrs to provide maximum grind fineness. 9. After the faceplate screws have been finger-tightened, use a flathead screwdriver to tighten them until snug. 10.Place the grinder upright. It is now ready for use. 28