KitchenAid KPES100PM User Guide - Page 15
Button and close the Steam Dial by rotating it clockwise until
UPC - 050946933627
View all KitchenAid KPES100PM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
FEATURES AND OPERATION 6. Place a coffee cup underneath the brew head. Do not attach the portafilter to the brew head. 7. Press the Espresso Button - it is not necessary to wait for the boiler to heat. This activates the water pump and fills the brewing boiler with water. After a few seconds, water will flow from the brew head. When the cup is full, press the Espresso Button again to stop the water pump. The brewing boiler is now ready for use. 10. When the pitcher is about half full, release the Hot Water Button and close the Steam Dial by rotating it clockwise until it stops. The frothing boiler is now ready for use. 11.If no espresso is desired at this time, press the On/Off Power Switch to turn the espresso machine off. 8. Place the frothing pitcher under the nozzle of the frothing arm. NOTE: Do not press the Espresso or Hot Water Buttons without water in the reservoir. Damage to the water pump may occur. 9. Slowly open the Steam Dial by turning it counter-clockwise, then press and hold the Hot Water Button. This activates the water pump and fills the frothing boiler with water. After a few seconds, water will start flowing from the nozzle. 15