KitchenAid KUDD01DSSS Use and Care Guide - Page 19

Error Codes How to recognize an Error Code When a failure has occurred, the dishwasher will continuously beep every second and the Start/Resume indicator light will be red. The error code will be displayed with the red light indicators on the wash cycle panel. (For specific failures see the illustrations below.) To solve a failure issue 1. Press the Power button to remove the error code. 2. If the error code and continuous beeps cannot be removed by pressing POWER, turn the power off at the power supply. 3. Check the chart below and correct the failure wherever possible. 4. After attending to the failure, turn the dishwasher on at the power supply. 5. If the error code and continuous beeps remain, turn the water and power supply off to the dishwasher. 6. Call your authorized service center. (See "Assistance or Service.") Advise the technician of the error code that has appeared on the dishwasher. Error Codes HEAVY NORMAL QUICK LIGHT/ RINSE CLEAN CHINA Possible Causes Flood switch has been activated. Motor problem. What to do Turn the water and power supply to the dishwasher off and call your authorized service center. Call your authorized service center. HEAVY NORMAL QUICK LIGHT/ RINSE CLEAN CHINA HEAVY NORMAL QUICK LIGHT/ RINSE CLEAN CHINA Temperature sensor failed. Temperature sensor or element failure. Make sure that water going in through the inlet hose is not hotter than 149ºF (65°C). (Refer to "To check water temperature" in the "Performance Tips" section.) Call your authorized service center. Call your authorized service center. HEAVY NORMAL QUICK LIGHT/ RINSE CLEAN CHINA Electronics malfunction. Call your authorized service center. HEAVY NORMAL QUICK LIGHT/ RINSE CLEAN CHINA HEAVY NORMAL QUICK LIGHT/ RINSE CLEAN CHINA Fill failure. s Turn on the dishwasher water supply. s Make sure the spray arm can rotate around the center. If the dishwasher is full of water, it will need to be emptied manually. If you have any questions about operating the product, please contact the Customer eXperience Center. (See "Assistance or Service.") 19