Kodak 3520D User Guide - Page 39
Using the Scanner, Powering Up/Down the Scanner, Starting and Stopping Scanning, Powering Up/Down - digital science
UPC - 041771185824
View all Kodak 3520D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4 Using the Scanner Powering Up/Down the Scanner • Press the button on the scanner's bottom right side to power it up. or • Press the button on the scanner's bottom right side to power it down. Starting and Stopping Scanning After you power up the scanner, the green indicator light flashes. When the green indicator light stops flashing and the lamps have been on at least 30 seconds, the scanner is ready to begin scanning. IMPORTANT: Always power up the scanner to its ready state before powering up the host computer. Before you start scanning, make sure that the lamps have been on for at least 30 seconds. Scanning is controlled by integration software developed for your application (the dialog box shown below is from the Kodak Digital Science Diagnostic Software that is included with the scanner). To start and stop scanning, refer to the documentation provided with your integration software. A-61159 May 2002 4-1