Kodak CX6445 User's Guide - Page 64
Running a Continuous Slide Show Loop, Displaying Pictures/Videos on a Television - cable
View all Kodak CX6445 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 4 Running a Continuous Slide Show Loop When you turn on Loop, the slide show is continuously repeated. 1 On the Slide Show menu, press to highlight Loop, then press the OK button. 2 Press to highlight On, then press the OK button. When you start a slide show, it repeats until you cancel it by pressing the OK button or until battery power is exhausted. The Loop setting remains until you change it. Displaying Pictures/Videos on a Television You can display pictures and videos on a television, computer monitor, or any device equipped with a video input. (Image quality on a television screen may not be as good as on a computer monitor or when printed.) NOTE: Make sure the Video Out setting (NTSC or PAL) is correct (page 63). Audio/video 1 cable Connect the audio/video cable (included) from the camera video-out port to the television video-in port (yellow) and audio-in port (white). Refer to your television user's guide for details. The camera screen turns off; the television screen acts as the camera display. 2 Review pictures and videos on the television screen. NOTE: The slide show stops if you connect or disconnect the cable while the slide show is running. 52