Kodak CX6445 User's Guide - Page 84
Installing the Custom Camera Insert, Remove the Universal Insert
View all Kodak CX6445 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Chapter 9 Installing the Custom Camera Insert A universal insert is pre-installed in the camera dock. It allows all Kodak EasyShare CX/DX6000/7000 series and LS600/700 series cameras to use the camera dock. A custom insert is included with your camera. It provides a perfect fit for your Kodak EasyShare CX6445 zoom digital camera. Remove the Universal Insert 1 Place your thumbs against the front of the universal insert. Press in and lift. 2 Lift the side edge of the insert, then remove the insert from the dock. 3 Save the universal insert as a spare. Install the Custom Insert Cutout 1 Position the custom insert so the cutout lines up with the camera dock connector. 2 Fit the insert into the groove in the dock. Snap it into place. Connector NOTE: To order a custom insert for your camera, visit www.kodak.com/go/cx6445accessories. 72