Kodak Pro 14n User Guide - Page 190
Inspecting and Cleaning the, Imager, click Service and Support
UPC - 041771334376
View all Kodak Pro 14n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Camera Care Inspecting and Cleaning the Imager CAUTION: It is important that you follow these instructions when inspecting and cleaning the imager. Failure to do so can damage your camera. 1. Turn off the camera. 2. Remove the lens from the camera. 3. Power on your camera using a fully charged battery. CAUTION: If the battery loses charge during the cleaning procedure, the shutter can close and damage your camera. 4. Put the camera in Manual Exposure mode (M). See page 7-15. 5. Choose Imager Clean from the Tools menu then choose Open. 6. Press the OK button. The mirror raises and the shutter opens. 7. Visually inspect the imager. If it is dirty, go to http://www.kodak.com/go/dcspro14n, click "Service and Support", then navigate to the link for "Cleaning Recommendations for CCD Coverglass". 8. Choose Imager Clean from the Tools menu then choose Close. 9. Press the OK button. The shutter closes and the mirror returns. 10. Turn off the camera. 11. Replace the lens. 14-4 April 29, 2004