Kodak V1003 User Manual - Page 55
Computer/connectivity problems, Status, Solution - troubleshooting
UPC - 041778666661
View all Kodak V1003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Troubleshooting Status Solution Battery life is short ■ Make sure the correct battery type is installed (see page 60). ■ Wipe the contacts with a clean, dry cloth before inserting a battery in the camera. ■ Insert a new or charged battery (see page 1). You cannot take a picture ■ Turn the camera off, then on again. ■ Depress the Shutter button all the way (see page 5). ■ Insert a new or charged battery (see page 1). ■ Memory is full. Transfer pictures to the computer (see page 43), delete pictures (see page 17), change image storage location (see page 33), or insert another card. Error message appears ■ Turn the camera off, then on again. on LCD ■ Remove the memory card. ■ Turn off the camera. Remove the battery. Wipe the contacts with a clean, dry cloth. ■ Insert a new or charged battery. ■ If the problem still exists, get help (see page 52). Memory card not ■ Card may be corrupted. Format the card in the camera (see recognized or camera page 35). freezes with card ■ Use another memory card. Cannot find the ■ To view pictures on a card or in internal memory, see page 33. desired picture/video Computer/connectivity problems Status Pictures do not transfer to computer Slide Show does not run on an external video device Solution ■ See Help in EasyShare software. ■ Adjust the camera Video Out setting to NTSC or PAL (see page 34). ■ Make sure the external device settings are correct. (See the device's user's guide). www.kodak.com/go/support 49