Konica Minolta AccurioPress C2060 AccurioPress C2070/C2070P/C2060/Print C2060L - Page 106
screen or the, Enter the zoom ratio or the image shift value using the keypad
View all Konica Minolta AccurioPress C2060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
5.1 Both Sides Adjustment % Press [Front] or [Back] to select the print side to be adjusted. & Enter the zoom ratio or the image shift value using the keypad, [,], or [+] on the screen or the Keypad on the control panel. - To specify the zoom ratio, press [Vertical] or [Horizontal], then enter a value. [Vertical] is used to adjust the zoom ratio in the crosswise direction. [Horizontal] is used to adjust the zoom ratio in the paper feed direction. To enlarge the print side, enter the value with a positive mark (+). To reduce it, enter the value with a negative mark (-). The adjustment value changes 0.01% on a 1-step basis. Adjustment Range: [Vertical] -1.00 to +1.00, [Horizontal] -1.00 to +1.00* * [Horizontal] of [Back] must be specified between -0.80 and +0.20. - To move the print side upward, downward, leftward, or rightward (image shift), press [Up/Down] or [Right/Left], then enter the value. To move the print side upward or rightward, enter the value with a positive mark (+). To move the print side downward or leftward, enter the value with a negative mark (-). The adjustment value changes 0.1 mm on a 1-step basis. Adjustment range: [Up/Down] -10.0 to +10.0, [Right/Left] -3.0 to +3.0 - If [Back Side Magnification Adjustment] is set to [OFF], [Horizontal] of [Back] is not available. - To switch the positive mark (+) and negative mark (-), press [+/-]. - To reset the numeric value you are currently entering, press [Clear]. - Pressing [Reset (Front/Back)] resets all the values you entered in [Front], [Back], or [Rotate/Skew]. - To adjust the zoom ratio and image shift, check the status in the center of a page. 5-24