Konica Minolta AccurioPress C2070/2070P AccurioPress C2070/C2070P/C2060/Print - Page 100
] to [8] on the printed-out chart using a, Measure the line length at each of points
View all Konica Minolta AccurioPress C2070/2070P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
5.1 Both Sides Adjustment ) Measure the line length at each of points [1] to [8] on the printed-out chart using a scale. - The figure on the right illustrates an example to measure points [1] and [5]. As illustrated in [5] [1] this example, measure the line length at each printed point. - The measurement value can be entered in units of up to 0.1 mm. - Write down the measured lengths so that you do not forget them. [5] [7] [1] [2] [6] [8] [3] [4] * Press each point number, then enter the measured length using the keypad, [,], or [+] on the screen. - To reset a value, press [Clear]. 5-18
5-18
5.1
Both Sides Adjustment
H
Measure the line length at each of points
[1] to [8] on the printed-out chart using a
scale.
-
The figure on the right illustrates an example
to measure points [1] and [5]. As illustrated in
this example, measure the line length at each
printed point.
-
The measurement value can be entered in
units of up to 0.1 mm.
-
Write down the measured lengths so that you
do not forget them.
I
Press each point number, then enter the measured length using the keypad, [
,
], or
[
+
] on the screen.
-
To reset a value, press [Clear].
[1]
[5]
[7]
[6]
[8]
[2]
[3]
[4]
[1]
[5]