Konica Minolta AccurioPress C2070/2070P AccurioPress C2070/C2070P/C2060/Print - Page 124
sequence from row E., Likewise, measure rows D to A.
View all Konica Minolta AccurioPress C2070/2070P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
5.2 Image Quality Adjustment 0 Place the FD-5BT ruler on the chart, while aligning the protrusion of the FD5BT with the ruler guide. To use the FD-5BT for measurement, remove it from the target mask. 1 Carry out the measurement in sequence from row E. - Hold down the side button of the FD-5BT. After a bleep sounds, slide the FD-5BT while holding down the side button. After sliding the FD-5BT to the opposite side, release the side button. - For details about how to use the FD-5BT, refer to the manual supplied with this machine. 2 Likewise, measure rows D to A. The measured parts are color-displayed on the screen in the same way as for the chart. 5-42
5-42
5.2
Image Quality Adjustment
O
Place the FD-5BT ruler on the chart,
while aligning the protrusion of the
FD-
5BT
with the ruler guide.
To use the
FD-5BT
for measurement, remove it
from the target mask.
P
Carry out the measurement in
sequence from row E.
-
Hold down the side button of the
FD-5BT
.
After a bleep sounds, slide the
FD-5BT
while holding down the side button.
After sliding the
FD-5BT
to the opposite
side, release the side button.
-
For details about how to use the
FD-5BT
,
refer to the manual supplied with this
machine.
Q
Likewise, measure rows D to A.
The measured parts are color-displayed on the
screen in the same way as for the chart.