Konica Minolta Kodak ScanMate i1180 User Guide - Page 31
Install a new lower feed roller and top feed roller by aligning the pins
View all Konica Minolta Kodak ScanMate i1180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3. Rotate the lower feed roller so the pin is positioned with the open slot, then lift the roller out of position. 4. Install a new lower feed roller and top feed roller by aligning the pins with the open slots and fitting each roller into position. Be sure the gears are aligned and the roller snaps into place. 4-12 A-61816 September 2014
4-12
A-61816
September 2014
3.
Rotate the lower feed roller so the pin is positioned with the open
slot, then lift the roller out of position.
4.
Install a new lower feed roller and top feed roller by aligning the pins
with the open slots and fitting each roller into position. Be sure the
gears are aligned and the roller snaps into place.