Konica Minolta Kodak i1840 User Guide - Page 51
Performing a Print test, Using the Enhanced, Printer and Patch Readers.
View all Konica Minolta Kodak i1840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Performing a Print test The print test checks to be sure the ink jets in the Enhanced Printer are working properly. 1. Touch Print Test. The Print Test screen will be displayed. 2. Place a blank sheet(s) of paper in the input elevator. 3. Touch OK. The document(s) in the output tray will display the results of the print test. 4. Remove the document(s) from the output tray and evaluate the appearance of the test pattern. • If the pattern is complete, you are ready to begin. • If the pattern is not legible: − Check to see that the print cartridge is installed properly. Repeat the print test. See Chapter 4, Using the Enhanced Printer and Patch Readers. − If the pattern is still not legible, replace the ink cartridge. 5. Touch End Job to return to the Idle screen. A-61555 May 2010 3-33