Konica Minolta Kodak i1840 User Guide - Page 92

Replacing the separation roller or separation roller tires, To replace the tires

Get Konica Minolta Kodak i1840 PDF manuals and user guides View all Konica Minolta Kodak i1840 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

Replacing the separation roller or separation roller tires 1. Open the pod. 2. Pull the separation pad holder forward and remove the separation roller. If you want to replace the separation roller, do Steps 3 and 4. If you want to replace the separation roller tires, go to Step 5. 3. Insert the new separation roller. Be sure to line up the slots on the separation roller with the holders. 4. Push the separation roller holder back in place and close the pod. To replace the tires: 5. Replace each tire by sliding the tire off the core. 6. Install each new tire by gently pulling it over the core. IMPORTANT:Do not overstretch the tire; it may tear. 7. Reinstall the separation roller. Be sure to line up the slots on the separation roller with the holders. 8. Push the separation roller holder back in place and close the pod. A-61555 May 2010 5-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
A-61555
May 2010
5-19
Replacing the separation
roller or separation roller
tires
1.
Open the pod.
2.
Pull the separation pad holder forward and remove the separation
roller.
If you want to replace the separation roller, do Steps 3 and 4. If you
want to replace the separation roller tires, go to Step 5.
3.
Insert the new separation roller. Be sure to line up the slots on the
separation roller with the holders.
4.
Push the separation roller holder back in place and close the pod.
To replace the tires:
5.
Replace each tire by sliding the tire off the core.
6.
Install each new tire by gently pulling it over the core.
IMPORTANT:Do not overstretch the tire; it may tear.
7.
Reinstall the separation roller. Be sure to line up the slots on the
separation roller with the holders.
8.
Push the separation roller holder back in place and close the pod.