Konica Minolta Kodak i620 User Guide - Page 7

Safety information Warning labels CAUTION: Moving parts, avoid contact. CAUTION: Hot surface, avoid contact. MSDS User precautions Gas springs warning Environmental information Material Safety Data Sheets (MSDS) are available on the Kodak website at: www.kodak.com/go/msds. When accessing the MSDSs from the website, you will be required to provide the catalog number of the consumable you want the Material Safety Data Sheet for. See Chapter 5, "Supplies and accessories" for consumables and catalog numbers. Users and their employer need to observe the common sense precautions applicable to the operation of any machinery. These include, but are not limited to, the following: • Do not wear loose clothing, unbuttoned sleeves, etc. • Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc. • Hair length should be kept short, using a hair net if needed, or tying long hair up in a bundle. • Remove all other loose objects from the area that could be drawn into the machine. • Take sufficient breaks to maintain mental alertness. Supervisors should review their practices and make compliance with these precautions a part of the job description for operation of the scanner or any mechanical device. If the gas springs exhibit a sign of decayed performance, call Service for replacement. Do not attempt to repair. • The Kodak i600 Series Scanners contain lead in the circuit board solder. Disposal of this material may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or, in the USA, visit the Electronics Industry Alliance website: www.eiae.org. • The product packaging is recyclable. • The i600 Series Scanners are Energy Star compliant and are shipped from the factory with the default time set to 15 minutes. 1-4 A-61500 April 2007