Konica Minolta bizhub 215 bizhub 215 Fax Operations User Guide - Page 80
Operating environment, Setup procedure, USB connection, Network connection - driver windows 7
View all Konica Minolta bizhub 215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
6.1 Overview of PC-Fax 6 6.1.2 Operating environment The following operating environment is required to use the fax driver. Operating system CPU Memory Port Drive Windows XP (x86, SP3 or later) Windows XP (x64, SP2 or later) Windows Server 2003 (x86/x64, SP2 or later) Windows Vista (x86/x64, SP2 or later) Windows Server 2008 (x86/x64) Windows Server 2008 R2 (x64) Windows 7 (x86/x64) Windows XP, Windows Server 2003: 300 MHz or higher specification is recommended Windows Vista: 1 GHz or higher specification is recommended Windows Server 2008, Windows 7: 2 GHz or higher recommended Windows XP, Windows Server 2003: 128 MB Windows Vista: 1 GB Windows Server 2008, Windows 7: 2 GB Sufficient memory resource is required for your operating system and the applications to be used. Ethernet 10Base-T/100Base-TX USB port compatible with USB Revision 2.0 CD-ROM/DVD drive 6.1.3 Setup procedure The setup refers to a series of procedures for connecting this machine to the computer and installing the fax driver to the computer. Perform the setup using the following procedures. Tips - When updating an existing fax driver, uninstall it first. For details, refer to p. 6-14. USB connection 1 Connect this machine to the computer using a USB cable. 2 Install the fax driver. d Reference For details on the USB interface, refer to the [User's Guide Printer Operations]. Network connection 1 Connect this machine to the computer. 2 Check that the computer to be used is connected to the network. 3 Specify the IP address of this machine, and then connect it to the network. 4 Change the network settings for this machine according to the connection method or protocol. % LPR: Select [TCP/IP Configuration] - [LPD Setting], and enable LPD printing. % Port 9100: Select [IPv4 Configuration], and enable the RAW port number (default: [9100]). 5 Install the fax driver. % Specify the network port for the fax driver according to the connection method or protocol. bizhub 215 6-3