Konica Minolta bizhub 215 bizhub 215 Fax Operations User Guide - Page 86
In Windows Vista/Server 2008, click [Printers] under [Hardware and Sound]. If [Control Panel] is dis - driver for windows 8
View all Konica Minolta bizhub 215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
6.2 Installing the fax driver 6 12 Follow the instructions on the pages that follow. % If the [User Account Control] window appears, click [Continue] or [Yes]. % When the Verify the publisher dialog box of [Windows Security] appears, click [Install this driver soft- ware anyway]. 13 Click [Finish]. 14 After installation has been finished, check that the icon of the installed fax is displayed on the [Printers] or [Devices and Printers] window. 15 Remove the CD-ROM from the CD-ROM drive. This completes the fax driver installation. Creating a new port using the Add Printer wizard to install the fax driver 0 Administrator authority is required for installation. 0 Since the printer is searched for during the installation, be sure to connect this machine to the network before turning it on. 1 Insert the fax driver CD-ROM into the CD-ROM drive of the computer. 2 Click [Start], then [Control Panel]. 3 Select the desired printer function in [Hardware and Sound]. % In Windows Vista/Server 2008, click [Printers] under [Hardware and Sound]. If [Control Panel] is displayed in Classic View, double-click [Printers]. % In Windows 7/Server 2008 R2, click [View devices and printers] under [Hardware and Sound]. If [Control Panel] appears in the icon display, double-click [Devices and Printers]. 4 On the toolbar, select the additional printer information. % Click [Add a printer] on the toolbar. The [Add Printer] wizard appears. 5 Click [Add a local printer]. The [Choose a printer port] dialog box appears. 6 Click [Create a new port:], and then select the port type. % To use the LPR/Port 9100 protocol, select [Standard TCP/IP Port]. 7 Click [Next]. 8 Specify the IP address. % To use the LPR/Port 9100 protocol, select [TCP/IP Device], and enter the IP address. 9 Click [Next]. % If the [Additional Port Information Required] or [More Port Information Required] window appears, go to Step 10. % If the [Install the printer driver] dialog box appears, go to Step 13. 10 Check [Custom] and click [Settings...]. 11 Change the settings according to the port, and then click [OK]. % For LPR connection, select [LPR], and then enter "Print" in the [Queue Name:] box. % You must discriminate between upper and lower case letters when entering it. % For Port 9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port Number:] box. % If both LPR and Port 9100 are enabled on this machine, the fax driver is connected to this machine using LPR. 12 Click [Next]. The [Install the printer driver] dialog box appears. bizhub 215 6-9