Konica Minolta bizhub C3100P bizhub C3100P Maintenance/Troubleshooting User Gu - Page 56
Cannot print, Description of problem, Check points, Remedy, Power Switch, Control Panel - memory full
View all Konica Minolta bizhub C3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4.3 Cannot print 4 4.3 Cannot print 4.3.1 Cannot print Description of problem A message saying "Printer is not connected" or "Print Error" appears on the computer screen. A postscript error appears on the computer screen. Check points Is the power turned on? Has the machine been placed in ErP Auto Power Off mode? Is another printer specified? Is the network or USB cable disconnected? Has an error occurred on the machine? Is there sufficient computer memory available? Is there sufficient computer memory available? There may be an error in the application software settings. Are the file printing settings correct? Remedy Check the Power Switch of this machine. If a hub is used, also check the hub power. If the machine is placed in ErP Auto Power Off mode, it cannot receive any jobs. Press the Power key to release the ErP Auto Power Off mode. Check the specified printer name. Make sure that the cables are correctly connected. If a hub is used, also check the connection with the hub. Check the Control Panel of this machine. Perform a test printing to check whether printing is possible. If test printing is successful, this indicates there are no problems on this machine or with the printer driver. In this case, remove the cause of memory shortage. If test printing fails, resolve any problems that may be occurring in the machine or with the printer driver. Perform a test printing to check whether printing is possible. If test printing is successful, this indicates there are no problems on this machine or with the printer driver. In this case, remove the cause of memory shortage. If test printing fails, resolve any problems that may be occurring in the machine or with the printer driver. Refer to the user's manual of the application software to check the settings. Change the settings and try to print again. [Maintenance/Troubleshooting] 4-3