Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Applied Functions Use - Page 110
Select [Enable] to enable F-Code TX. Also enter [SUB Address] and [Pass, 2-Sided Binding Direc
View all Konica Minolta bizhub C3850FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
2.9 Registering a destination 2 Settings [Original Direction] [2-Sided Binding Direction] [Special Original] [Timer TX] [Password TX] [F-Code] [Document Name] [Frame Erase] Description When scanning a double-sided original, you can specify the original loading direction so that the vertical direction is set correctly after scanning. [Left] is specified by default. Select the biding position of original when scanning both sides of the original. [Auto] is specified by default. Select [Long Original] to scan a long original. [Normal] is specified by default. To set a time to start fax transmission, select [On]. Also, specify when to start fax transmission. [Off] is specified by default. To send fax with a password to a destination for which fax destinations are restricted by passwords (Closed Network RX enabled), select [On]. Also, enter the password. [Off] is specified by default. Select [Enable] to enable F-Code TX. Also enter [SUB Address] and [Password]. [Disable] is specified by default. If necessary, change the file name of the scanned original. Erases an area of an identical specified width along the four sides of an original. You can erase the four sides of the original to different widths. [Off] is specified by default. [Applied Functions] 2-32