Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Applied Functions Use - Page 56
[Text], 1.5.7 [Network] tab, [General Settings] - [Network Interface Settings]
View all Konica Minolta bizhub C3850FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
1.5 Available operations in Administrator mode 1 [Text] To display: Administrator mode - [Address] - [Text] - [Text List] Enables you to register body messages that are used when sending E-mails. Also, it enables you to confirm or edit the registered information of the body that is saved on this machine. To register message text, click [Edit], then enter message text to be registered (using up to 256 characters). Tips - Up to 10 bodies can be registered, and a body can be selected from them before transmission. - By selecting [E-mail Default] in the body list, you can specify the default body that is used for E-mail transmission. 1.5.7 [Network] tab [General Settings] - [Network Interface Settings] To display: Administrator mode - [Network] - [General Settings] - [Network Interface Settings] (This menu is displayed when the optional Network Interface Card is installed. ) Select the type of the network to be connected. Item [Network Type] Description Select the type of the network to be connected to this machine. [Ethernet] is specified by default. [General Settings] - [Ethernet Settings] To display: Administrator mode - [Network] - [General Settings] - [Ethernet Settings] (This menu is displayed when [Ethernet] is selected in Administrator mode - [Network] - [General Settings] - [Network Interface Settings] - [Network Type]. ) Specify the network speed, and check the MAC address. Item [Speed/Duplex] [MAC Address] Description Select the network speed according to your environment. [Auto] is specified by default. Displays the MAC address of the network interface card of this machine. [General Settings] - [Wireless LAN Settings] To display: Administrator mode - [Network] - [General Settings] - [Wireless LAN Settings] (This menu is displayed when [Wireless LAN] is selected in Administrator mode - [Network] - [General Settings] - [Network Interface Settings] - [Network Type]. ) Manually configure a setting to connect this machine to the wireless LAN environment. Item [SSID] [Authentication/Encryption Algorithm] [WEP Key] Description Enter the SSID of the access point to be connected to this machine (using up to 32 byte ASCII characters). Select the algorithm used for authentication or encryption. [None] is specified by default. Specify the WEP key when [WEP] is selected in [Authentication/Encryption Algorithm]. • [Key Input Method]: Select a WEP key input method. [Text 5 Characters] is specified by default. • [Select Key]: Select the required one of the WEP keys registered using [WEP Key 1] to [WEP Key 4]. [1] is specified by default. • [WEP Key 1] to [WEP Key 4]: Enter WEP keys. [Applied Functions] 1-50